YAML Blueprint Reference

Root Elements

  • name: human readable names
  • services: a list of ServiceSpecification elements
  • location (or locations taking a list): a LocationSpecification element as a string or a map

Service Specification Elements

Within the services block, a list of maps should be supplied, with each map defining a ServiceSpecification. Each ServiceSpecification should declare the service type (synonyms serviceType and service_type), indicating what type of service is being specified there. The following formats are supported for defining types:

  • com.acme.brooklyn.package.JavaEntityClass
  • java:com.acme.brooklyn.package.JavaEntityClass
  • java-entity-class (where this has been added to the catalog)

A reference of some of the common service type instances used is included in a section below.

Within the ServiceSpecification, other key-value pairs can be supplied to customize the entity being defined, with these being the most common:

  • id: an ID string, used to refer to this service

  • location (or locations): as defined in the root element

  • brooklyn.config: configuration key-value pairs passed to the service entity being created

  • brooklyn.children: a list of ServiceSpecifications which will be configured as children of this entity

  • brooklyn.policies: a list of policies, each as a map described with their type and their brooklyn.config as keys

  • brooklyn.enrichers: a list of enrichers, each as a map described with their type and their brooklyn.config as keys; see the keys declared on individual enrichers; also see this enricher example for a detailed and commented illustration

  • brooklyn.initializers: a list of EntityInitializer instances to be constructed and run against the entity, each as a map described with their type and their brooklyn.config as keys. An EntityInitiailzer can perform arbitrary customization to an entity whilst it is being constructed, such as adding dynamic sensors and effectors. These classes must expose a public constructor taking a single Map where the brooklyn.config is passed in. Some common initializers are:

    • org.apache.brooklyn.core.effector.ssh.SshCommandEffector: takes a name and command, and optionally a map of named parameters to their description and defaultValue, to define an effector with the given name implemented by the given SSH command (on an entity which as an ssh-able machine)

    • org.apache.brooklyn.core.sensor.ssh.SshCommandSensor: takes a name and command, and optionally a period, to create a sensor feed which populates the sensor with the given name by running the given command (on an entity which as an ssh-able machine)

    • org.apache.brooklyn.core.sensor.windows.WinRmCommandSensor: For a command supplied via WinRm. Takes a name, command, and optionally a period and executionDir, to create a sensor feed which populates the sensor with the given name by running the given command (on an entity which as an WinRM-able machine).
      "~" will use the default execution directory for the WinRm session which is usually %USERPROFILE%

  • brooklyn.parameters: documents a list of typed parameters the entity accepts. These define config keys exposed on the type, including metadata for prompting a user to supply them. All config keys inherited from supertypes are available as parameters by default, and their properties (e.g. default values) can be overridden. Parameters (config keys) have the following properties:

    • name (required): identifier by which to reference the parameter when setting or retrieving its value
    • label: an identifier string to present to the user when prompting for a value, same as name if empty
    • description: short text describing the parameter behaviour/usage, presented to the user
    • type: the type of the parameter, one of string, integer, long, float, double, timestamp, duration, port, or a fully qualified Java type name; the default is string; obvious coercion is supported so timestamp accepts most common ISO date formats, duration accepts 5m, and port accepts 8080+
    • default: a default value; this will be coerced to the declared type
    • pinned: mark the parameter as pinned (always displayed) for the UI. The default is true (unless an ancestor sets false; config keys from Java types are not pinned)
    • constraints: a list of constraints the parameter should meet; for details, see Entity Configuration.

    A shorthand notation is also supported where just the name of the parameter can be supplied as an item in the list, with the other values being unset or the default. See displayName in the following example for an illustration of this:

    brooklyn.parameters:
      # user.age parameter is required, pinned and fully specified
      - name: user.age
        type: integer
        label: Age
        description: the age of the user
        pinned: true
        constraints:
        - required
      # user.name is optional, is not pinned and has a default
      - name: user.name
        default: You
        pinned: false
      # shorthand notation: displayName will be an optional config of type string with no default
      - displayName
    

    Entities, policies, and initializers may accept additional key-value pairs, usually documented in their documentation (e.g. javadoc), or in the case of Java often as static fields in the underlying Java class. Often there are config keys or flags (indicated by @SetFromFlag) declared on the class; these declared flags and config keys may be passed in at the root of the ServiceSpecification or in brooklyn.config. (Undeclared config is only accepted in the brooklyn.config map.) Referencing the parameters from within java classes is identical to using config keys. In yaml it's usually referenced using $brooklyn:scopeRoot().config("displayName"). See below for more details on scopes.

  • brooklyn.tags: documents a list of tag objects which should be assigned to the entity.

Location Specification Elements

In brief, location specs are supplied as follows, either for the entire application (at the root) or for a specific ServiceSpecification:

location:
  jclouds:aws-ec2:
    region: us-east-1
    identity: AKA_YOUR_ACCESS_KEY_ID
    credential: <access-key-hex-digits>

Or in many cases it can be in-lined:

location: localhost
location: named:my_openstack
location: aws-ec2:us-west-1

For the first immediately, you'll need password-less ssh access to localhost. For the second, you'll need to define a named location in brooklyn.properties, using brooklyn.location.named.my_openstack.... properties. For the third, you'll need to have the identity and credentials defined in brooklyn.properties, using brooklyn.location.jclouds.aws-ec2.... properties.

If specifying multiple locations, e.g. for a fabric:

locations:
- localhost
- named:my_openstack
- aws-ec2:us-east-2   # if credentials defined in `brooklyn.properties
- jclouds:aws-ec2:
    region: us-east-1
    identity: AKA_YOUR_ACCESS_KEY_ID
    credential: <access-key-hex-digits>

If you have pre-existing nodes, you can use the byon provider, either in this format:

location:
  byon:
    user: root
    privateKeyFile: ~/.ssh/key.pem
    hosts:
    - 81.95.144.58
    - 81.95.144.59
    - brooklyn@159.253.144.139
    - brooklyn@159.253.144.140

or:

location:
  byon:
    user: root
    privateKeyFile: ~/.ssh/key.pem
    hosts: "{81.95.144.{58,59},brooklyn@159.253.144.{139-140}"

You cannot use glob expansions with the list notation, nor can you specify per-host information apart from user within a single byon declaration. However you can combine locations using multi:

location:
  multi:
    targets:
    - byon:
        user: root
        privateKeyFile: ~/.ssh/key.pem
        hosts:
        - 81.95.144.58
        - 81.95.144.59
    - byon:
        privateKeyFile: ~/.ssh/brooklyn_key.pem
        hosts: brooklyn@159.253.144{139-140}

DSL Commands

Dependency injection other powerful references and types can be built up within the YAML using the concise DSL defined here:

  • $brooklyn:attributeWhenReady("sensor") will store a future which will be blocked when it is accessed, until the given sensor from this entity "truthy" (i.e. non-trivial, non-empty, non-zero) value (see below on component for looking up values on other sensors)
  • $brooklyn:config("key") will insert the value set against the given key at this entity (or nearest ancestor); can be used to supply config at the root which is used in multiple places in the plan
  • $brooklyn:sensor("sensor.name") returns the given sensor on the current entity if found, or an untyped (Object) sensor; $brooklyn:sensor("com.acme.brooklyn.ContainingEntityClass", "sensor.name") returns the strongly typed sensor defined in the given class
  • $brooklyn:entity("ID") refers to a Brooklyn entity with the given ID; you can then access the following subfields, using the same syntax as defined above but with a different reference entity, e.g. $brooklyn:entity("ID").attributeWhenReady("sensor"):
    • .attributeWhenReady("sensor")
    • .config("key")
    • .sensor("sensor.name")
  • $brooklyn:component("scope", "ID") is also supported, to limit scope to any of
    • global: looks for the ID anywhere in the plan
    • child: looks for the ID anywhere in the child only
    • descendant: looks for the ID anywhere in children or their descendants
    • sibling: looks for the ID anywhere among children of the parent entity
    • parent: returns the parent entity (ignores the ID)
    • this: returns this entity (ignores the ID)
  • $brooklyn:root() will return the topmost entity (the application)
  • $brooklyn:scopeRoot() will return the root entity in the current plan scope. For catalog items it's the topmost entity in the plan, for application plans it is the same as $brooklyn:root().
  • $brooklyn:formatString("pattern e.g. %s %s", "field 1", "field 2") returns a future which creates the formatted string with the given parameters, where parameters may be strings or other tasks such as attributeWhenReady
  • $brooklyn:urlEncode("val") returns a future which creates a string with the characters escaped so it is a valid part of a URL. The parameter can be a string or another task. For example, $brooklyn:urlEncode($brooklyn:config(\"mykey\")). It uses "www-form-urlencoded" for the encoding, which is appropriate for query parameters but not for some other parts of the URL (e.g. space is encoded as '+').
  • $brooklyn:literal("string") returns the given string as a literal (suppressing any $brooklyn: expansion)
  • $brooklyn:object(Map) creates an object, using keys type to define the java type, and either object.fields or brooklyn.config to supply bean/constructor/flags to create an instance
  • $brooklyn:entitySpec(Map) returns a new ServiceSpecification as defined by the given Map, but as an EntitySpec suitable for setting as the value of ConfigKey<EntitySpec> config items (such as dynamiccluster.memberspec in DynamicCluster)

Parameters above can be supplied either as strings or as lists and maps in YAML, and the $brooklyn: syntax can be used within those parameters.

Some Powerful YAML Entities

All entities support configuration via YAML, but these entities in particular have been designed for general purpose use from YAML. Consult the Javadoc for these elements for more information:

  • Vanilla Software in VanillaSoftwareProcess: makes it very easy to build entities which use bash commands to install and the PID to stop and restart
  • Chef in ChefSoftwareProcess: makes it easy to use Chef cookbooks to build entities, either with recipes following conventions or with configuration in the ServiceSpecification to use arbitrary recipes
  • DynamicCluster: provides resizable clusters given a dynamiccluster.memberspec set with $brooklyn.entitySpec(Map) as described above
  • DynamicFabric: provides a set of homogeneous instances started in different locations, with an effector to addLocation, i.e. add a new instance in a given location, at runtime

results matching ""

    No results matching ""