Winrm4j Client

Winrm4j parameters

Check org.apache.brooklyn.location.winrm.WinRmMachineLocation parameters available for WinRM.

  • host : Host to connect to (required).Default value null
  • port : WinRM port to use when connecting to the remote machine.
    If no port is specified then it defaults to a port depending on the winrm.useHttps flag.
  • winrm.useHttps : The parameter tells the machine sensors whether the winrm port is over https. If the parameter is true then 5986 will be used as a winrm port.
    Default value: false
  • retriesOfNetworkFailures : The parameter sets the number of retries for connection failures. If you use high value, consider taking care for the machine's network.
    Default value: 4
  • winrm.useNtlm : The parameter configures tells the machine sensors whether the winrm port is over https. If the parameter is true then 5986 will be used as a winrm port.
    Default value: true
  • winrm.computerName : Windows Computer Name to use for authentication.
    Default value: null
  • user : User to connect as
    Default value: null
  • password : Password to use to connect.
    Default value: null
  • waitWindowsToStart : By default Brooklyn will return the machine immediately after Brooklyn is able to WinRM. Sometimes restart could happen after a Windows VM is provisioned. This could be because of System Upgrade or other. By setting this config key to 60s, 5m or other X Duration of time Brooklyn will wait X amount of time for disconnect to occur. If connection failure occurs it will wait X amount of time for the machine to come up.
    Default value: null

If there are location config keys prefixed with brooklyn.winrm.config. prefix will be removed and it will be used to instantiate a org.apache.brooklyn.util.core.internal.winrm.WiRmTool implementation.

WinRM Connectivity Diagnostics

If you are experiencing problems with a windows blueprint against a jclouds location where Apache Brooklyn complains about failing to connect to the IP you should check those things.

  1. Apache Brooklyn is using correct username and password
  2. Apache Brooklyn can reach the IP of the provisioned machine. WinRM port 5985 or 5986 is also reachable from Apache Brooklyn.
  3. Check whether WinRmMachineLocation#getDefaultUserMetadataString(ConfigurationSupportInternal) is applied on the VM. This script should be passed to the cloud and executed in order to configure WinRM according to Apache Brooklyn requirements for authentication. So far windows startup script are known to be supported on AWS EC2 and VCloud Director. If your cloud doesn't use this script then tune WinRM parameters accordingly.
  4. Check whether you use winrm over http or over https.
    1. If you are using WinRM over http then make sure WinRM service on target VM has AllowUnencrypted = true

If the quick list above doesn't help then follow the steps bellow.

To speed up diagnosing the problem we advice to trigger a deployment with the JcloudsLocation flag destroyOnFailure: false so you can check status of the provisioned machine or try later different WinRM parameters with a Apache Brooklyn BYON Location.

After you determined what is the username and the password you can proceed with next steps. (Notice that for cloud providers which use Auto Generated password will not be logged. For these cases use Java Debug to retrieve ot or provision a VM manually with the same parameters when using Apache Brooklyn to provision a jclouds location.)

The first step is to find what is the winrm service configuration on the target host.

  1. If you have RDP access or KVM like access to the VM then check the winrm service status with the command bellow. winrm get winrm/config/service If you are using http you should have AllowUnencrypted to false. Encryption is supported only over https. Sample output:

     MaxConcurrentOperations = 4294967295
     MaxConcurrentOperationsPerUser = 1500
     EnumerationTimeoutms = 240000
     MaxConnections = 300
     MaxPacketRetrievalTimeSeconds = 120
     AllowUnencrypted = true
     Auth
         Basic = false
         Kerberos = true
         Negotiate = true
         Certificate = false
         CredSSP = true
         CbtHardeningLevel = Relaxed
     DefaultPorts
         HTTP = 5985
         HTTPS = 5986
     IPv4Filter = *
     IPv6Filter = *
     EnableCompatibilityHttpListener = false
     EnableCompatibilityHttpsListener = false
     CertificateThumbprint
     AllowRemoteAccess = true
    

Use an Apache Brooklyn BYON blueprint to try easily other connection options.

location:
  byon:
    hosts:
    - winrm: 10.0.0.1
      user: Administrator
      password: pa55w0rd
      osFamily: windows
services:
- type: org.apache.brooklyn.entity.software.base.VanillaWindowsProcess
  brooklyn.config:
     checkRunning.command: echo checkRunning
     install.command: echo installCommand
  1. Check IP is reachable from Apache Brooklyn instance Check whether telnet 10.0.0.1 5985 makes successfully a socket.
  2. If AllowUnencrypted is false and you are using winrm over http then apply winrm set winrm/config/service @{AllowUnencrypted="true"} If jclouds or the cloud provider doesn't support passing sysprep-specialize-script-cmd then consider modifying Windows VM Image.
  3. Check your username and password. Notice in Windows passwords are case sensitive. Here is how it looks log from a wrong password:

     INFO: Authorization loop detected on Conduit "{http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd}WinRmPort.http-conduit" on URL "http://192.168.122.1:5985/wsman" with realm "null"
     Oct 21, 2016 10:43:11 AM org.apache.cxf.phase.PhaseInterceptorChain doDefaultLogging
     WARNING: Interceptor for {http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd}WinRmService#{http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd}Create has thrown exception, unwinding now
     org.apache.cxf.interceptor.Fault: Could not send Message.
     at org.apache.cxf.interceptor.MessageSenderInterceptor$MessageSenderEndingInterceptor.handleMessage(MessageSenderInterceptor.java:64)
    
  4. When having wrong password you may want to try logging on a different domain This is possible from brooklyn.winrm.config.winrm.computerName location config.

  5. If you want to configure Windows target host with https then check the article Configuring WINRM for HTTPS
  6. If you are still seeing authorization errors then try connecting via winrm with the embedded winrs client. First make sure you have the server in trusted hosts.

Then execute a simple command like

winrs -r:10.0.2.15 -unencrypted -u:Administrator -p:pa55w0rd ipconfig

results matching ""

    No results matching ""