Windows Blueprints

Brooklyn can deploy to Windows servers using WinRM to run commands. These deployments can be expressed in pure YAML, and utilise Powershell to install and manage the software process. This approach is similar to the use of SSH for UNIX-like servers.

About WinRM

WinRM - or Windows Remote Management to give its full title - is a system administration service provided in all recent Windows Server operating systems. It allows remote access to system information (provided via WMI) and the ability to execute commands. For more information refer to Microsoft’s MSDN article on Windows Remote Management.

WinRM is available by default in Windows Server, but is not enabled by default. Brooklyn will, in most cases, be able to switch on WinRM support, but this is dependent on your cloud provider supporting a user metadata service with script execution (see below).

Locations for Windows

You must define a new location in Brooklyn for Windows deployments. Windows deployments require a different VM image ID to Linux, as well as some other special configuration, so you must have separate Brooklyn locations for Windows and Linux deployments.

In particular, you will most likely want to set these properties on your location:

  • imageId or imageNameRegex - select your preferred Windows Server image from your cloud provider.
  • hardwareId or minRam/minCores - since Windows machines generally require more powerful servers, ensure you get a machine with the required specification.
  • useJcloudsSshInit - this must be set to false. Without this setting, jclouds will attempt to connect to the new VMs using SSH, which will fail on Windows Server.
  • templateOptions - you may also wish to request a larger disk size. This setting is cloud specific; on AWS, you can request a 100GB disk by setting this property to {mapNewVolumeToDeviceName: ["/dev/sda1", 100, true]}.

In your YAML blueprint:

...
location:
  jclouds:aws-ec2:
    region: us-west-2
    identity: AKA_YOUR_ACCESS_KEY_ID
    credential: <access-key-hex-digits>
    imageNameRegex: Windows_Server-2012-R2_RTM-English-64Bit-Base-.*
    imageOwner: 801119661308
    hardwareId: m3.medium
    useJcloudsSshInit: false
    templateOptions: {mapNewVolumeToDeviceName: ["/dev/sda1", 100, true]}
...

Alternatively, you can define a new named location in brooklyn.properties:

brooklyn.location.named.AWS\ Oregon\ Win = jclouds:aws-ec2:us-west-2
brooklyn.location.named.AWS\ Oregon\ Win.displayName = AWS Oregon (Windows)
brooklyn.location.named.AWS\ Oregon\ Win.imageNameRegex = Windows_Server-2012-R2_RTM-English-64Bit-Base-.*
brooklyn.location.named.AWS\ Oregon\ Win.imageOwner = 801119661308
brooklyn.location.named.AWS\ Oregon\ Win.hardwareId = m3.medium
brooklyn.location.named.AWS\ Oregon\ Win.useJcloudsSshInit = false
brooklyn.location.named.AWS\ Oregon\ Win.templateOptions = {mapNewVolumeToDeviceName: ["/dev/sda1", 100, true]}

A Sample Blueprint

Creating a Windows VM is done using the org.apache.brooklyn.entity.software.base.VanillaWindowsProcess entity type. This is very similar to VanillaSoftwareProcess, but adapted to work for Windows and WinRM instead of Linux. We suggest you read the documentation for VanillaSoftwareProcess to find out what you can do with this entity.

Entity authors are strongly encouraged to write Windows Powershell or Batch scripts as separate files, to configure these to be uploaded, and then to configure the appropriate command as a single line that executes given script.

For example - here is a simplified blueprint (but see Tips and Tricks below!):

name: Server with 7-Zip

location:
  jclouds:aws-ec2:
    region: us-west-2
    identity: AKA_YOUR_ACCESS_KEY_ID
    credential: <access-key-hex-digits>
    imageNameRegex: Windows_Server-2012-R2_RTM-English-64Bit-Base-.*
    imageOwner: 801119661308
    hardwareId: m3.medium
    useJcloudsSshInit: false
    templateOptions: {mapNewVolumeToDeviceName: ["/dev/sda1", 100, true]}

services:
- type: org.apache.brooklyn.entity.software.base.VanillaWindowsProcess
  brooklyn.config:
    templates.preinstall:
      file:///Users/richard/install7zip.ps1: "C:\\install7zip.ps1"
    install.command: powershell -command "C:\\install7zip.ps1"
    customize.command: echo true
    launch.command: echo true
    stop.command: echo true
    checkRunning.command: echo true
    installer.download.url: http://www.7-zip.org/a/7z938-x64.msi

The installation script - referred to as /Users/richard/install7zip.ps1 in the example above - is:

$Path = "C:\InstallTemp"
New-Item -ItemType Directory -Force -Path $Path

$Url = "${config['installer.download.url']}"
$Dl = [System.IO.Path]::Combine($Path, "installer.msi")
$WebClient = New-Object System.Net.WebClient
$WebClient.DownloadFile( $Url, $Dl )

Start-Process "msiexec" -ArgumentList '/qn','/i',$Dl -RedirectStandardOutput ( [System.IO.Path]::Combine($Path, "stdout.txt") ) -RedirectStandardError ( [System.IO.Path]::Combine($Path, "stderr.txt") ) -Wait

Where security-related operation are to be executed, it may require the use of CredSSP to obtain the correct Administrator privileges: you may otherwise get an access denied error. See the sub-section How and Why to re-authenticate within a powershell script for more details.

This is only a very simple example. A more complex example can be found in the Microsoft SQL Server blueprint in the Brooklyn source code.

Tips and Tricks

The best practices for other entities (e.g. using VanillaSoftwareProcess) apply for WinRM as well.

Execution Phases

Blueprint authors are strongly encouraged to provide an implementation for install, launch, stop and checkRunning. These are vital for the generic effectors such as stopping and restarting the process.

Powershell

Powershell commands can be supplied using config options such as launch.powershell.command.

This is an alternative to supplying a standard batch command using config such as launch.command. For a given phase, only one of the commands (Powershell or Batch) should be supplied.

Getting the Right Exit Codes

WinRM (or at least the chosen WinRM client!) can return a zero exit code even on error in certain circumstances. It is therefore advisable to follow the guidelines below.

For a given command, write the Powershell or Batch script as a separate multi-command file. Upload this (e.g. by including it in the files.preinstall configuration). For the configuration of the given command, execute the file.

When you have a command inside the powershell script which want to report its non zero exiting, please consider adding a check for its exit code after it. Example:

& "C:\install.exe"
If ($lastexitcode -ne 0) {
    exit $lastexitcode
}

For Powershell files, consider including

$ErrorActionPreference = "Stop"

at the start of the file. $ErrorActionPreference Determines how Windows PowerShell responds to a non-terminating error (an error that does not stop the cmdlet processing) at the command line or in a script, cmdlet, or provider, such as the errors generated by the Write-Error cmdlet. https://technet.microsoft.com/en-us/library/hh847796.aspx

See Incorrect Exit Codes under Known Limitations below.

Executing Scripts From Batch Commands

In a batch command, you can execute a batch file or Powershell file. For example:

install.command: powershell -NonInteractive -NoProfile -Command "C:\\install7zip.ps1"

Or alternatively:

install.command: C:\\install7zip.bat

Executing Scripts From Powershell

In a Powershell command, you can execute a batch file or Powershell file. There are many ways to do this (see official Powershell docs). For example:

install.powershell.command: "& C:\\install7zip.ps1"

Or alternatively:

install.powershell.command: "& C:\\install7zip.bat"

Note the quotes around the command. This is because the “&” has special meaning in a YAML value.

Uploading Script and Configuration Files

Often, blueprints will require that (parameterized) scripts and configuration files are available to be copied to the target VM. These must be URLs resolvable from the Brooklyn instance, or on the Brooklyn classpath. One simple way to achieve this is to compile the support files into a .jar, which is then added to AMP’s ‘dropins’ folder. Alternatively, an OSGi bundle can be used, referenced from the catalog item.

Ensure that these scripts end each line with “\r\n”, rather than just “\n”.

There are two types of file that can be uploaded: plain files and templated files. A plain file is uploaded unmodified. A templated file is interpreted as a FreeMarker template. This supports a powerful set of substitutions. In brief, anything (unescaped) of the form ${name} will be substituted, in this case looking up “name” for the value to use.

Templated files (be they configuration files or scripts) gives a powerful way to inject dependent configuration when installing an entity (e.g. for customising the install, or for referencing the connection details of another entity). A common substitution is of the form ${config['mykey']}. This looks up a config key (in this case named “mykey”) and will insert the value into the file. Another common substitution is is of the form ${attribute['myattribute']} - this looks up the attribute named “myattribute” of this entity.

Files can be referenced as URLs. This includes support for things like classpath://mypath/myfile.bat. This looks for the given (fully qualified) resource on the Brooklyn classpath.

The destination for the file upload is specified in the entity’s configuration. Note that “" must be escaped. For example "C:\\install7zip.ps1".

A list of plain files to be uploaded can be configured under files.preinstall, files.install and files.runtime. These are uploaded respectively prior to executing the pre.install.command, prior to install.command and prior to pre.launch.command.

A list of templated files to be uploaded can be configured under templates.preinstall, templates.install and templates.runtime. The times these are uploaded is as for the plain files. The templates substitutions will be resolved only at the point when the file is to be uploaded.

For example:

files.preinstall:
- classpath://com/acme/installAcme.ps1
- classpath://com/acme/acme.conf

Parameterised Scripts

Calling parameterised Batch and Powershell scripts is done in the normal Windows way - see offical Microsoft docs. For example:

install.command: "c:\\myscript.bat myarg1 myarg2"

Or as a Powershell example:

install.powershell.command: "& c:\\myscript.ps1 -key1 myarg1 -key2 myarg2"

It is also possible to construct the script parameters by referencing attributes of this or other entities using the standard attributeWhenReady mechanism. For example:

install.command: $brooklyn:formatString("c:\\myscript.bat %s", component("db").attributeWhenReady("datastore.url"))

Powershell - Using Start-Process

When you are invoking a command from a powershell script with Start-Process cmdlet, please use the -Wait and the -PassThru arguments. Example Start-Process C:\mycommand -Wait -PassThru

Using -Wait guarantees that the script process and its children and thus the winrm session won’t be terminated until it is finished. -PassThru Returns a process object for each process that the cmdlet started. By default, this cmdlet does not generate any output. See https://technet.microsoft.com/en-us/library/hh849848.aspx

Rebooting

Where a reboot is required as part of the entity setup, this can be configured using config like pre.install.reboot.required and install.reboot.required. If required, the installation commands can be split between the pre-install, install and post-install phases in order to do a reboot at the appropriate point of the VM setup.

We Strongly recommend to write blueprints in a way that they do NOT restart automatically windows and use one of the pre.install.reboot.required or install.reboot.required parameters to perform restart.

Install Location

Blueprint authors are encouraged to explicitly specify the full path for file uploads, and for paths in their Powershell scripts (e.g. for installation, configuration files, log files, etc).

How and Why to re-authenticate within a powershell script

Some installation scripts require the use of security-related operations. In some environments,
these fail by default when executed over WinRM, even though the script may succeed when run locally
(e.g. by using RDP to connect to the machine and running the script manually). There may be no
clear indication from Windows why it failed (e.g. for MSSQL install, the only clue is a
security exception in the installation log).

When a script is run over WinRM, the credentials under which the script are run are marked as ‘remote’ credentials, which are prohibited from running certain security-related operations. The solution is to obtain a new set of credentials within the script and use those credentials to required commands.

The WinRM client uses Negotiate+NTLM to authenticate against the machine. This mechanism applies certain restrictions to executing commands on the windows host.

For this reason you should enable CredSSP on the windows host which grants all privileges available to the user. https://technet.microsoft.com/en-us/library/hh849719.aspx#sectionSection4

To use Invoke-Command -Authentication CredSSP the Windows Machine has to have: - Up and running WinRM over http. The custom-enable-credssp.ps1 script enables winrm over http because Invoke-Command use winrm over http by default. Invoke-Command can be used with -UseSSL option but this will lead to modifying powershell scripts. With always enabling winrm over http on the host, blueprint’s powershell scripts remain consistent and not depend on the winrm https/http environments. We hope future versions of winrm4j will support CredSSP out of the box and wrapping commands in Invoke-Command will not be needed. - Added trusted host entries which will use Invoke-Command - Allowed CredSSP

All the above requirements are enabled in Apache Brooklyn through brooklyn-server/software/base/src/main/resources/org/apache/brooklyn/software/base/custom-enable-credssp.ps1 script which enables executing commands with CredSSP in the general case. The script works for most of the Windows images out there version 2008 and later.

Please ensure that Brooklyn’s changes are compatible with your organisation’s security policy.

Check Microsoft Documentation for more information about Negotiate authenticate mechanism on technet.microsoft.com

Re-authentication also requires that the password credentials are passed in plain text within the script. Please be aware that it is normal for script files - and therefore the plaintext password - to be saved to the VM’s disk. The scripts are also accessible via the Brooklyn web-console’s activity view. Access to the latter can be controlled via Entitlements.

As an example (taken from MSSQL install), the command below works when run locally, but fails over WinRM:

( $driveLetter + "setup.exe") /ConfigurationFile=C:\ConfigurationFile.ini

The code below can be used instead (note this example uses Freemarker templating):

& winrm set winrm/config/service/auth '@{CredSSP="true"}'
& winrm set winrm/config/client/auth '@{CredSSP="true"}'
#
$pass = '${attribute['windows.password']}'
$secpasswd = ConvertTo-SecureString $pass -AsPlainText -Force
$mycreds = New-Object System.Management.Automation.PSCredential ($($env:COMPUTERNAME + "\${location.user}"), $secpasswd)
#
$exitCode = Invoke-Command -ComputerName $env:COMPUTERNAME -Credential $mycreds -ScriptBlock {
    param($driveLetter)
    $process = Start-Process ( $driveLetter + "setup.exe") -ArgumentList "/ConfigurationFile=C:\ConfigurationFile.ini" -RedirectStandardOutput "C:\sqlout.txt" -RedirectStandardError "C:\sqlerr.txt" -Wait -PassThru -NoNewWindow
    $process.ExitCode
} -Authentication CredSSP -ArgumentList $driveLetter
#
exit $exitCode

In this example, the ${...} format is FreeMarker templating. Those sections will be substituted before the script is uploaded for execution. To explain this example in more detail:

  • ${attribute['windows.password']} is substituted for the entity’s attribute “windows.password”. This (clear-text) password is sent as part of the script. Assuming that HTTPS and NTLM is used, the script will be encrypted while in-flight.

  • The ${location.user} gets (from the entity’s machine location) the username, substituting this text for the actual username. In many cases, this will be “Administrator”. However, on some
    clouds a different username (with admin privileges) will be used.

  • The username and password are used to create a new credential object (having first converted the password to a secure string).

  • Credential Security Service Provider (CredSSP) is used for authentication, to pass the explicit
    credentials when using Invoke-Command.

Windows AMIs on AWS

Windows AMIs in AWS change regularly (to include the latest Windows updates). If using the community AMI, it is recommended to use an AMI name regex, rather than an image id, so that the latest AMI is always picked up. If an image id is used, it may fail as Amazon will delete their old Windows AMIs.

If using an image regex, it is recommended to include the image owner in case someone else uploads a similarly named AMI. For example:

brooklyn.location.named.AWS\ Oregon\ Win = jclouds:aws-ec2:us-west-2
brooklyn.location.named.AWS\ Oregon\ Win.imageNameRegex = Windows_Server-2012-R2_RTM-English-64Bit-Base-.*
brooklyn.location.named.AWS\ Oregon\ Win.imageOwner = 801119661308
...

stdout and stderr in a Powershell script

When calling an executable in a Powershell script, the stdout and stderr will usually be output to the console. This is captured by Brooklyn, and shown in the activities view under the specific tasks.

An alternative is to redirect stdout and stderr to a file on the VM, which can be helpful if one expects sys admins to log into the VM. However, be warned that this would hide the stdout/stderr from Brooklyn’s activities view.

For example, instead of running the following:

D:\setup.exe /ConfigurationFile=C:\ConfigurationFile.ini

The redirect can be achieved by using the Start-Process scriptlet:

Start-Process D:\setup.exe -ArgumentList "/ConfigurationFile=C:\ConfigurationFile.ini" -RedirectStandardOutput "C:\sqlout.txt" -RedirectStandardError "C:\sqlerr.txt" -PassThru -Wait

The -ArgumentList is simply the arguments that are to be passed to the executable, -RedirectStandardOutput and RedirectStandardError take file locations for the output (if the file already exists, it will be overwritten). The -PassThru argument indicates that Powershell should write to the file in addition to the console, rather than instead of the console. The -Wait argument will cause the scriptlet to block until the process is complete.

Further details can be found on the Start-Process documentation page on the Microsoft TechNet site.

Troubleshooting

Much of the operations troubleshooting guide is applicable for Windows blueprints.

User metadata service requirement

WinRM requires activation and configuration before it will work in a standard Windows Server deployment. To automate this, Brooklyn will place a setup script in the user metadata blob. Services such as Amazon EC2’s Ec2ConfigService will automatically load and execute this script. If your chosen cloud provider does not support Ec2ConfigService or a similar package, or if your cloud provider does not support user metadata, then you must pre-configure a Windows image with the required WinRM setup and make Brooklyn use this image.

If the configuration options userMetadata or userMetadataString are used on the location, then this will override the default setup script. This allows one to supply a custom setup script. However, if userMetadata contains something else then the setup will not be done and the VM may not not be accessible remotely over WinRM.

Credentials issue requiring special configuration

When a script is run over WinRM over HTTP, the credentials under which the script are run are marked as ‘remote’ credentials, which are prohibited from running certain security-related operations. This may prevent certain operations. The installer from Microsoft SQL Server is known to fail in this case, for example. For a workaround, please refer to How and Why to re-authenticate withing a powershell script above.

WebServiceException: Could not send Message

We detected a WebServiceException and different SocketException during deployment of long lasting Application Blueprint against VcloudDirector.

Launching the blueprint bellow was giving constantly this type of error on launch step.

services:
  type: org.apache.brooklyn.entity.software.base.VanillaWindowsProcess
  brooklyn.config:
    pre.install.command: echo preInstallCommand
    install.command: echo installCommand > C:\\install.txt
    post.install.command: echo postInstallCommand
    customize.command: echo customizeCommand
    pre.launch.command: echo preLaunchCommand
    launch.powershell.command: |
      Start-Sleep -s 400
      Write-Host Test Completed
    post.launch.command: echo postLaunchCommand
    checkRunning.command: echo checkRunningCommand
    stop.command: echo stopCommand

With series of tests we concluded that on the Vcloud Director environment we were using a restart was happening ~2 minutes after the VM is provisioned. Logging in the host and search for System event of type 1074 in Windows Event Viewer, we found two 1074 events where the second one was

The process C:\Windows\system32\winlogon.exe (W2K12-STD) has initiated the restart of computer WIN-XXXX on behalf of user
NT AUTHORITY\SYSTEM for the following reason: Operating System: Upgrade (Planned) Reason Code: 0x80020003 Shutdown Type: restart Comment:

Normally on other clouds only one restart event is registered and the first time winrm connection is made the Windows VM is ready for use.

For this particular case when you want this second restart to finish we made waitWindowsToStart location parameter which basically adds additional check assuring the Windows VM provisioning is done.

For example when using waitWindowsToStart: 5m location parameter, Apache Brooklyn will wait 5 minutes to see if a disconnect occurs. If it does, then it will again wait 5m for the machine to come back up. The default behaviour in Apache Brooklyn is to consider provisioning done on the first successful winrm connection, without waiting for restart.

To determine whether you should use this parameter you should carefully inspect how the image you choose to provision is behaving. If the description above matches your case and you are getting connection failure message in the middle of the installation process for your blueprints, a restart probably occurred and you should try this parameter.

Before using this parameter we advice to check whether this is really your case. To verify the behavior check as described above.

AMIs not found

If using the imageId of a Windows community AMI, you may find that the AMI is deleted after a few weeks. See Windows AMIs on AWS above.

VM Provisioning Times Out

In some environments, provisioning of Windows VMs can take a very long time to return a usable VM. If the image is old, it may install many security updates (and reboot several times) before it is usable.

On a VMware vCloud Director environment, the guest customizations can cause the VM to reboot (sometimes several times) before the VM is usable.

This could cause the WinRM connection attempts to timeout. The location configuration option waitForWinRmAvailable defaults to 30m (i.e. 30 minutes). This can be increased if required.

Incorrectly prepared Windows template can cause the deployment to time-out expecting an interaction by the user. You can verify if this is the case by RDP to the deployment which is taking to much time to complete. It is recommended to manually deploy a single VM for every newly created Windows template to verify that it can be used for unattended installations and it doesn’t wait and/or require an input by the user. See Windows template settings for an Unattended Installation under Known Limitations below.

Windows log files

Details of the commands executed, and their results, can be found in the Brooklyn log and in the Brooklyn web-console’s activity view.

There will also be log files on the Windows Server. System errors in Windows are usually reported in the Windows Event Log -
see https://technet.microsoft.com/en-us/library/cc766042.aspx for more information.

Additional logs may be created by some Windows programs. For example, MSSQL creates a log in %programfiles%\Microsoft SQL Server\130\Setup Bootstrap\Log\ - for more information see https://msdn.microsoft.com/en-us/library/ms143702.aspx.

Known Limitations

Use of Unencrypted HTTP

Brooklyn is currently using unencrypted HTTP for WinRM communication. This means that the login credentials will be transmitted in clear text.

In future we aim to improve Brooklyn to support HTTPS. However this requires adding support to the underlying WinRM library, and also involves certificate creation and verification.

Incorrect Exit Codes

Some limitations with WinRM (or at least the chosen WinRM Client!) are listed below:

Single-line Powershell files

When a Powershell file contains just a single command, the execution of that file over WinRM returns exit code 0 even if the command fails! This is the case for even simple examples like exit 1 or thisFileDoesNotExist.exe.

A workaround is to add an initial command, for example:

Write-Host dummy line for workaround 
exit 1
Direct Configuration of Powershell commands

If a command is directly configured with Powershell that includes exit, the return code over WinRM is not respected. For example, the command below will receive an exit code of 0.

launch.powershell.command: |
  echo first
  exit 1
Direct Configuration of Batch commands

If a command is directly configured with a batch exit, the return code over WinRM is not respected. For example, the command below will receive an exit code of 0.

launch.command: exit /B 1
Non-zero Exit Code Returned as One

If a batch or Powershell file exits with an exit code greater than one (or negative), this will be reported as 1 over WinRM.

We advise you to use native commands (non-powershell ones) since executing it as a native command will return the exact exit code rather than 1. For instance if you have installmssql.ps1 script use install.command: powershell -command "C:\\installmssql.ps1" rather than using install.powershell.command: "C:\\installmssql.ps1" The first will give you an exact exit code rather than 1

PowerShell “Preparing modules for first use”

The first command executed over WinRM has been observed to include stderr saying “Preparing modules for first use”, such as that below:

< CLIXML
<Objs Version="1.1.0.1" xmlns="http://schemas.microsoft.com/powershell/2004/04"><Obj S="progress" RefId="0"><TN RefId="0"><T>System.Management.Automation.PSCustomObject</T><T>System.Object</T></TN><MS><I64 N="SourceId">1</I64><PR N="Record"><AV>Preparing modules for first use.</AV><AI>0</AI><Nil /><PI>-1</PI><PC>-1</PC><T>Completed</T><SR>-1</SR><SD> </SD></PR></MS></Obj><Obj S="progress" RefId="1"><TNRef RefId="0" /><MS><I64 N="SourceId">2</I64><PR N="Record"><AV>Preparing modules for first use.</AV><AI>0</AI><Nil /><PI>-1</PI><PC>-1</PC><T>Completed</T><SR>-1</SR><SD> </SD></PR></MS></Obj></Objs>

The command still succeeded. This has only been observed on private clouds (e.g. not on AWS). It could be related to the specific Windows images in use. It is recommended that VM images are prepared carefully, e.g. so that security patches are up-to-date and the VM is suitably initialised.

WinRM executeScript failed: httplib.BadStatusLine: ‘’

As described in https://issues.apache.org/jira/browse/BROOKLYN-173, a failure has been observed where the 10 attempts to execute the command over WinRM failed with:

httplib.BadStatusLine: ''

Subsequently retrying the command worked. It is unclear what caused the failure, but could have been that the Windows VM was not yet in the right state.

One possible workaround is to ensure the Windows VM is in a good state for immediate use (e.g. security updates are up-to-date). Another option is to increase the number of retries, which defaults to 10. This is a configuration option on the machine location, so can be set on the location’s brooklyn.properties or in the YAML:

execTries: 20

Direct Configuration of Multi-line Batch Commands Not Executed

If a command is directly configured with multi-line batch commands, then only the first line will be executed. For example the command below will only output “first”:

launch.command: |
  echo first
  echo second

The workaround is to write a file with the batch commands, have that file uploaded, and execute it.

Note this is not done automatically because that could affect the capture and returning of the exit code for the commands executed.

Install location

Work is required to better configure a default install location on the VM (e.g. so that environment variables are set). The installation pattern for linux-based blueprints, of using brooklyn-managed-processes/installs, is not used or recommended on Windows. Files will be uploaded to C:\ if no explicit directory is supplied, which is untidy, unnecessarily exposes the scripts to the user, and could cause conflicts if multiple entities are installed.

Blueprint authors are strongly encourages to explicitly specific directories for file uploads and in their Powershell scripts.

Windows template settings for an Unattended Installation

Windows template needs certain configuration to be applied to prevent windows setup UI from being displayed. The default behavior is to display it if there are incorrect or empty settings. Showing Setup UI will prevent the proper deployment, because it will expect interaction by the user such as agreeing on the license agreement or some of the setup dialogs.

Detailed instruction how to prepare an Unattended installation are provided at https://technet.microsoft.com/en-us/library/cc722411%28v=ws.10%29.aspx.